The mosquito killing lamp is made of mosquito's strong lighting and heat seeking characteristics, and the principle that the mosquito's fly flies into the mosquito killing lamp and is electrocuted by the high-voltage electric network. The DC high voltage on the high-voltage power grid is usually 800~1500V, and the short-circuit current is less than 1mA, which is not dangerous to the normal people. At the same time, the ultraviolet light emitted from the mosquito killing lamp can be used for soft light illumination at night. This product is suitable for family, office, restaurant, hospital, school, this product has no noise, long life, smokeless, no irritating smell, safety and environmental protection. It is not harmless to the human body, and the effect of hunting is better.

　　Usage: 1. This product uses voltage 220V, 50Hz three wire socket. 2, put the machine in any place in the room, the user only needs to turn on the power supply, press the switch, the mosquito control lamp is automatic work. In order to improve the killing effect, this product should be put in the 1.5 to 2 meters in height can achieve better catching and killing, avoid glare and hanging in front of the electric fan and the wind caused by the encounter of air disturbance. (Note: A. shock when mosquitoes and flies a "crackling" sound is a normal phenomenon. B. regular cleaning power, clean light pipe of the dust, to lure out effect).

　　Note: 1. Do not use the mosquito control lamp in the area where the tide is likely to be dampened or near the flame, and the level of the mosquito control lamp should be hung up, and the flammable objects should not be attached to them. 2. Do not use the mosquito control lamp in the place where there is water spray. 3. Before the power grid is not discharged in use or after the power supply is cut off, wire and foreign objects are inserted into the grid. 4. When cleaning the power grid, the power supply is cut off first, the net cover is removed, and after the screwdriver is discharged, it is cleaned again. (Note: do not contact the conductive parts of the product during the discharge of the body).