There are three kinds of mosquito killing lamps: stick trap lamp, electronic lamp and air suction lamp.

　　The first one is the stick and catch mosquito lamp: no bad smell of burning, no sound and electric sparks, no decomposition and scattering of insect bodies due to electric shock, no high-voltage power grid, safe use.

　　The second is the electronic mosquito lamp: the circuit design is current limiting, simple and low power consumption; high efficiency, as long as the power supply can be used.

　　The third is the air flow mosquito killing lamp: built-in small fan and lamp tube, according to the principle of wind power, text will be attracted into the air drying room. With the characteristics of energy saving and pollution-free, it is generally used in families.

　　How to use mosquito lamp

　　When the environment is dark and static, the mosquito killer has the fastest killing speed and the best effect.

　　For the first use, it's better to close the doors and windows or screen doors and windows when it's just dark in the evening, turn off the lights, and let people leave for 2-3 hours. When people return to the room, they don't stop working until the next morning, lasting for 1-2 weeks. In summer or during mosquito activities, it can be used every day to eliminate the mosquitoes that do not leak into the room tightly through doors and windows.

　　For use in offices and business places, the mosquito catcher can be turned on and the lights can be turned off before going off work in the evening. After being trapped overnight, indoor mosquitoes can be basically eliminated.

　　Precautions for using mosquito lamp

　　Before using the electronic mosquito killing lamp and mosquito killing racket, check whether the voltage and frequency are consistent with the product, and use the power socket consistent with the product. The ground wire of the socket must be well grounded, then connect the power supply, turn on the power switch, when the purple light comes out from the lamp tube, the work of fly killing and mosquito killing has started. After using for a period of time, if you see that there are many mosquito and fly residues accumulated in the base under the lamp, you should clean it in time. When cleaning, you must first cut off the power supply, hold the insulating part of the screwdriver, use the metal rod of the screwdriver to open and discharge the contact between the two network wires between the power grids, then press the external network with two thumbs, take out the rear network, and take out the chassis for cleaning. When cleaning the fly and mosquito killing lamp, be sure to cut off the power supply and discharge the high-voltage power grid with a screwdriver. When discharging, you must hold the insulating part of the screwdriver to prevent electric shock. Electric sparks will be produced when the electronic mosquito lamp is used to kill flies and mosquitoes. Therefore, it is strictly prohibited to use it in places where there is much dust and the possibility of flammability and explosion, so as to avoid accidents.

　　Before using the air flow mosquito killing lamp, check whether the voltage and frequency are consistent with the product, and use the power socket consistent with the product, then connect the power supply, turn on the power switch, when the blue violet light is seen in the lamp tube, the mosquito killing work has started. When there are many mosquito residues accumulated in the air drying room of the air flow mosquito killing lamp, it should also be cleaned in time. When cleaning, turn off the power supply first, turn on the air drying room and pour it into the garbage can, and then install it for use.